TunesHub

The Great Hub Of Technology Tunes

Facebook Twitter Pinterest YouTube

CyanogenMOD 10 For Walton Primo, Karbonn A5, A7, W25

Published on: at 8:42 AM | Posted By:
If you're thinking to upgrade your Walton Primo / Karbonn a5 and Symphony W25 / Karbonn A7 to CyangenMOD 10 (Jelly Bean 4.1.2) then you're reading the right article. All of the users of these phones who upgraded their phone to ICS or Jelly Bean can use CyanogenMOD 10 also.

Requirement for Upgrading Walton Primo / Karbonn A5 and A7 / Symphony W25 to CyanogenMOD

  • Any ICS Baseband (591379_8376_WCDMA_V000003 Recommended)
  • At least 200 MB System Partition
  • Custom CWM Recovery Installed

Download and Flash CyanogenMOD 10 (Jelly Bean 4.1.2) Rom For Primo / Karbonn A5 and A7 / W25

This process will guide you through installation process of CM 10 ROM. In the CWM (Clock work MOD) recovery use Volume up and Volume down button of your phone to navigate and Power button to select.
  1. Download cm10-primo-tuneshub.zip (update_cm10_w619_592zn_0_3_5.zip) and place it on the root of the SD-card.
  2. Now Reboot to Recovery. Means Power off the phone and then press and hold Volume up and Power button till the Red screen comes.
  3. Select Wipe Data / Factory Reset then select Yes.
  4. Now select Install zip from SDcard then select Choose zip from SDcard and choose cm10-primo-tuneshub.zip. Afte that select Yes.
  5. No more steps needed for Walton Primo and Karbonn A5 users. So After successful installation of the ROM select Reboot from the main menu and enjoy.
  6. But Wait...Symphony W25 and Karbonn A7 users. Download this Boot image flasher and repeat step 4. But this time choose cm10-a7-w25-boot.zip. That's all.

Some screenshots of CyanogenMOD 10 On Primo, A5, A7 and W25

CyanogenMOD 10 Primo - Theme Chooser CyanogenMOD 10 Primo - Notificaton Panel CyanogenMOD 10 Primo - DialPad CyanogenMOD 10 Primo - About Phone

Known Bugs Of CM 10 on Walton Primo / Karbonn A5, A7 / Symphony W25

Personally when I upgraded my Walton Primo the only unbearable problem I fetched is "All the lights of the KeyPad never turns off". So for this circumstance battery consumes a little bit faster. And the bad news is I didn't got any solution for this.

Of course as none of the Jelly Bean ROMs of Walton Primo, Karbonn A5, A7 and Symphony W25 has support for video camera. But Still you can capture images. I was never been able to Record a video with my Jelly Bean upgraded phone.

And the another problem that bothered me is "The built-in Portable Hotspot doesn't work" while there is no problem when you get connected with other Hotspots. But if you use some sort of good WiFi tether 3rd party software then it'll work.

Sometimes the system apps loses their user data. Let's say if you change the bluetooth's name then it will work. But if you turn the bluetooth off and turn it on again or you restart your phone then you'll see the changed bluetooth name reverted back to default.

Of course I am not responsible for your fault. If your phone got bricked following this article then it's your responsibility. Who told you to follow this article if you don't know what you're doing? But don't you worry. If it gets bricked then Just leave a comment below with your phone model. I will try to give you the link of a another fresh ROM ( Which can revive your bricked Android phone ).

57 comments On "CyanogenMOD 10 For Walton Primo, Karbonn A5, A7, W25"

  1. I'm using walton primo ics 4.0.4.
    If I install cm and then want to go back to ics stock , what to do then?

    ReplyDelete
    Replies
    1. Yes, of course. You can revert back to stock ICS.

      All you need to do is backup your stock ICS rom via recovery. Then follow this article to upgrade to Cyanogen MOD 10.

      Then when you want to use Walton Primo's stock ICS again then simply restore the rom the backed up before.

      Delete
    2. I can't install CWM in my Walton Primo(ICS). I tried many ways(cwm auto installer, mobile uncle, mtk droid tools, sp flash) . Can u please tell me detailed process. Or, Please, Write a post on it ASAP

      Delete
    3. Is it possible to install cm 10 using stock recovery? I can flash AP. My phone is rooted. And what I fogot to say is, when I install cwm and boot to recovery there is a red screen. No recovery option appeared.

      Delete
    4. No it's not possible to install CM 10 using stock recovery. And no recovery option appeared means you're using a inappropriate version of recovery.

      Delete
    5. You can Install custom CWM recovery on Walton Primo using Mobile Uncle Tools.

      Download and extract Walton Primo's Custom Recovery and put recovery.img in the root of the SD card. And flash it using Mobile Uncle tools.

      Delete
  2. vai eta ki "Symphony Xplorer W35" e deya jabe ??

    ReplyDelete
    Replies
    1. No. This cyanogen MOD can't be used with Symphony w35.

      Delete
  3. my wi fi and bluetooth is not working in karbonn A5i after this rom instalation wat i do?

    ReplyDelete
    Replies
    1. Use third party software to get WiFi hotspot working. And fixing some bugs of this CyanogenMOD rom for your Karbonn a5 is quiet impossible.

      But I don't think there is something wrong with bluetooth.

      Delete
  4. Currently I'm using Walton primo 4.0.4 (previously ginger band) Can I upgrade it to jelly bean?

    ReplyDelete
    Replies
    1. Of course. You can.

      This article is tested on Walton Primo 4.0.4

      Delete
    2. Is there any bug for Walton Primo?

      Delete
    3. @Abdur Rahman Shajib

      Yes. There is some bugs for all mentioned phone even for Walton Primo.

      Delete
  5. Can you tell me how to update my phones baseband to ics?? I hv a karbonn A7. Its rooted nd i really want to install a custom rom. Plz help me.

    ReplyDelete
    Replies
    1. First download Primo ICS.rar and you'll get Baseband's BP + ICS AP + PDF guide there. So follow that pdf guide and upgrade Karbonn a7's baseband then follow this article.

      Delete
  6. i have karbonn a2+...can i able to install this custom rom?...if not please give me download link of another stock rom...

    ReplyDelete
    Replies
    1. You won't be able to install this custom ROM I guess. This is only for Karbonn a5 and a7.

      Though here is one. Karbonn A2+ Flash file But I am not sure about it. Cause I don't have any Karbonn a2+ to check

      Delete
  7. Replies
    1. Absolutely not. This question isn't fair bro. Cause If it does then I would mention it in article.

      Every phone has different platform and OS.

      Delete
  8. I need Symphony Xplorer W30 ICS or Jelly Bean or Kitkat ROM Please Help Me....

    ReplyDelete
    Replies
    1. You should have commented on Ask Help Forum. So next time please don't post a comment on inappropriate article.

      Whatever unfortunately I don't have a Xplorer W30 to build one for you. And of course there is no custom ROM for Symphony W30 which is available in the public internet. So sorry.

      Delete
  9. Thanks dear. can you give me the primo f1 jelly bean custom rom or link? it will so helpful for me. Swapno

    ReplyDelete
    Replies
    1. So sorry I am currently unable to give you any Jelly Bean custom ROMs for Primo F1

      Delete
  10. i upgrade my walton primo form gingerbed to ics.. but after that my rom show me only 150mb insted of 512 mb.. what happens to my phn.. how cn i resolve it.. plz need advice bro..

    ReplyDelete
    Replies
    1. Don't worry bro. That's the available free RAM not total.

      You can use Android Assistant to see the total RAM.

      Delete
  11. sir i have karbonn smart a26.can i install custome roms(CyanogenMod , paraandroid) on this phone. plz tell me sir. if my mobile supports custome roms then u will give me links. please ....

    ReplyDelete
    Replies
    1. Of course you can install custom ROMs on your Karbonn Smart A26 but currently there is no available ROMs for your device. Sorry for the inconvenience.

      Delete
  12. Can i use ths rom in a7 star

    ReplyDelete
  13. Did you upgraded your baseband? If yes then try searching on Google to get some custom ICS or JB ROM for your A7+. I don't have the device so I am unable to give you some working ROMs list.

    ReplyDelete
  14. hello sir i want to revert to my original walton primo 2.3 rom. what to do ? could you please help me?

    ReplyDelete
    Replies
    1. First downgrade the baseband and restore the stock ROM via CWM backup.

      Baseband to downgrade

      If you don't know the way to upgrade or downgrade baseband then follow [GUIDE]Baseband Updating/Downgrading for Karbonn A5/A7,A7+ and Walton Primo

      Delete
  15. can i update my karbonn a25???

    ReplyDelete
    Replies
    1. Yes. You can update your Karbonn a25. Download these three parts. Extract them and install via CWM or TWRP recovery.

      Karbonn a25 Jelly Bean 4.3 Part1
      Karbonn a25 Jelly Bean 4.3 Part2
      Karbonn a25 Jelly Bean 4.3 Part3

      Delete
    2. does CWM will work in karbonn a25 and can we download android 4.4

      Delete
    3. by the way ..give other link this link dont work.....

      Delete
    4. Oh. I see. Sorry then. I don't have more links.

      And I am unable to tell you much about Karbonn a25 because I don't have this device.

      You better google it yourself.

      Delete
  16. Hello bro, I have a walton Primo updated to 4.0.4 and another walton primo with 2.3.6. So can I update my Gingerbread version to Ice cream Sandwich by backuping up 4.0.4 by CWM from latest primo set and restore it to 2.3.6 Version Primo set. Can I do so? If yes,reply soon please :)

    ReplyDelete
    Replies
    1. No. Absolutely not. Don't do that. If you do your device will be bricked down.

      First you'll need to upgrade 2.3.6 phone's baseband. Then you can restore the backup.

      Delete
  17. Hi,
    Is it risk to update android from ginger bred to jell bean?

    ReplyDelete
    Replies
    1. No. There is no risk. But if you do something wrong then you'll device will be temporally bricked. And Of course it can be unbricked again.

      Delete
  18. Can I use it on Symphony W68?

    ReplyDelete
    Replies
    1. Absolutely no. There is no Cyanogen MOD for MTK devices like Symphony W68

      Delete
  19. Hi,
    My phone is symphony w25. I've upgraded the set from ICS to the Jellybean ROM that you've supplied. Now everything on my phone is in Chinese. How can I get English back?

    ReplyDelete
    Replies
    1. You need to recognize the Language & input from settings by icons.

      Then you'll need to tap on first option. then change the language to English.

      And it was your fault. You miss configured the ROM while booting first time.

      Delete
    2. Thank You...Somehow I made the mistake.

      Delete
  20. Salam, I am using custom rom Color OS v 2.4 in my Walton primo H2. However, am i able to install CyanogenMod in my phone ? If yes which version do i use ( at first is was 4.2.2 but after using custom roms it shows 4.2.1)?

    ReplyDelete
    Replies
    1. No. You'll not be able to use any sort of CyanogenMOD in any MediaTek device like Primo H2

      Delete
  21. is there cyanogenmod for symphony w72?

    ReplyDelete
    Replies
    1. Cyanogen MOD for Symphony W72 isn't possible. Because it is a MTK device.

      Delete
  22. As u say "At least 200 MB System Partition"..!! can u help me how to make it..?

    ReplyDelete
  23. There are some bug in this rom.
    Please fix those.
    This ROM always keep hard button lights on. And some other bugs.

    ReplyDelete
    Replies
    1. I know the bug about the hard button LED problem. And I mentioned that in the article before.

      I don't own this phone anymore so I am unable to fix that. Also I am not the developer of this ROM.

      Delete
  24. CyanogenMOD for Symphony W71 possible ?

    ReplyDelete
    Replies
    1. Symphony W71 is a MediaTek device so no cyanogenMOD for your device is possible.

      Delete

Please try to write English. Don't use Bangla, Banglish etc. And if you post a comment in other languages then it may got deleted or ignored without notice.

Get Latest Updates

Blog Archive

Total Pageviews